Guide to Update Galaxy Tab 10.1 P7500 Official Firmware

How to Update Samsung Galaxy Tab 10.1 P7500 to Latest Official Android Version. 

Samsung has been bringing in speedy updates in order to bring the latest Android software to its entire product line up.

UBLPA Android 4.0.4 is the latest Ice Cream Sandwich firmware update for Samsung Galaxy Tab 10.1 3G P7500 that is now available for download.

P7500 UBLPA Android 4.0.4 Ice Cream Sandwich update is a regular maintenance update that usually comes with bug fixes and performance tweaks. If KIES don’t show the firmware then you have download it manually and install it using third party tool. Continue reading this tutorial to learn how to install UBLPA Android 4.0.4 ICS official firmware on Galaxy Tab 10.1 P7500. Please note, this is ODIN flash-able firmware and not CWM recovery flash-able.




Disclaimer: This guide will use a tool; Odin to flash the official firmware on your Galaxy Tab 10.1 P7500. During the process, you might lose all your existing installed apps and personal settings. It is therefore necessary for you to follow the guide carefully. Also, please, do mind that this tutorial is only for Galaxy Tab 10.1 P7500. Don’t try this guide in any other Android device.




The official firmware P7500UBLPA Android 4.0.4 ICS can be installed easily on Galaxy Tab 10.1 3G P7500. To install this firmware we will use ODIN tool. Here you should note, this flashing process may wipe all your existing installed apps and personal settings. You should follow this guide carefully to properly backup your data that you can restore later.




Download :




1. Android 4.0.4 p7500 UBLPA 10.1 TAB


2. Odin all version



Android 4.0.4 UBLPA Firmware Details:

PDA: P7500UBLPA

CSC: P7500CHOLP1

Version: 4.0.4

Date: 2013-01-30

Regions: Brazil




Warning! This tutorial is only for Galaxy Tab 10.1 3G, model number P7500. Don’t try this guide in any other Android device. Check your device’s model number in: Settings » About tablet. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. Although, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.




Guide to Update Galaxy Tab 10.1 P7500 to UBLPA Android 4.0.4 ICS Official Firmware




Extract the firmware zip file that you have downloaded using the link above, you will then get a .tar file alongside other files.

Extract Odin zip file to get Odin3 v3.07.exe.

Power off your tablet. Wait 5-6 seconds to confirm complete switch off.

Put the Galaxy Tab 10.1 P7500 in Download Mode by pressing and holding Volume Down and Power button until Samsung Galaxy logo appears in tablet screen. Wait for a few seconds and you will be in download mode.

Run Odin3 v3.07.exe (see Step 2) as an Administrator.

Connect your Galaxy Tab 10.1 P7500 with your PC using USB cable. A message will appear under Odin’s message box in the bottom left saying “Added!!”. If you don’t get it, then try another USB port. If that too doesn’t work, then reinstall the USB driver. If you successfully see the “Added!!” message in Odin, you are good to go. Also, check for COM port with a number in Yellow to make sure that you have successfully added your device.

Select the following files in Odin at their respective tabs from extracted UBLPA firmware folder :

Click the ‘PDA’ Button, and select the .tar file here with *code* appearing in file-name.

Click the ‘Phone’ Button, and select file with *modem* in its name (Ignore, if this file does not file exist).

Click the ‘CSC’ Button, and select file with *csc* in its name (Ignore, if this file does not file exist).

Click the ‘PIT’ Button, and select the .pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.

In Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Please make sure that Re-Partition checkbox is selected, only if you are using a .pit file.

Recheck everything mentioned in Step 7 & 8 above. Hit the ‘START’ button to begin the flashing process.

Once the flashing process is completed, the tablet will reboot automatically and you will see a PASS message in the top-left-most box. You can now unplug the USB cable to disconnect your device from computer.

If you have followed every point described in the guide, your Galaxy Tab 10.1 P7500 should now be running Android 4.0.4 Ice Cream Sandwich build P7500UBLPA. If there are any issues, feel free to post in the comments section for our staff to take a look at it.